What is the life replacement cycle of the tooth plate
Release time:
2025-02-22
The life and replacement cycle of the toothed plate depends mainly on the environment in which it is used and the material it is designed from. In general, the life of the toothed plate is 3-5 years, and the specific replacement cycle is as follows:
Toothed plate in waste incinerator: the service life is generally 2-3 years. Regularly check the wear and tear of the plates and replace them in time to ensure the normal operation of the equipment.
Toothed plate in the crusher: usually a crusher toothed plate life of about three months, depending on the wear and tear in the process of use.
Factors affecting the life of the plate
Use of the environment: high temperature, corrosive environment will accelerate the wear and corrosion of the plate, shorten its service life.
Material characteristics: hardness and abrasive materials will increase the wear speed of the plate.
Maintenance: regular inspection and maintenance, timely replacement of worn parts, can effectively extend the service life of the plate.
Methods to extend the life of tooth plate
Selection of suitable materials: the use of high-strength, wear-resistant materials, such as high manganese steel (containing more than 12% manganese), can improve the wear resistance and service life of the tooth plate.
Optimize the design: design the tooth plate into the shape of up and down symmetry, which can be turned around and used when the wear is serious and prolong the service life.
Strictly control the particle size and hardness of incoming materials: avoid large materials or impurities into the equipment, reduce the impact and wear on the plate.
Previous Page
Next Page
Previous Page:
Next page:
Jiangsu Baonuo Casting Co., Ltd.
Mobile: 86-18352660777
E-mail: kun.wang@jsbono.cn
Address: No.89, Liu Hao Road, Liu Hao Town, Haimen District, Nantong City, Jiangsu Province, China.
Sweep the mobile terminal
Copyright©2025 Jiangsu Baonuo Casting Co., Ltd. All Rights Reserved